Vacuum Drying of Oak Wood

ABSTRACT

Vacuum drying, j,e drying under absolute gas pressure of about 10⊃ Pa. is an efficient means of reducing the process period and of producing good quality wood. We will examine here continuous vacuum drying where the plank surfaces are kept at a constant temperature, which remains above the boiling point, and moisture flowing to the surface is extracted from the kiln.

We have carried out an experimental study of oak drying under such conditions. The drying rate and moisture content profile of the sample (40 mm thick) are recorded during the whole drying period.

A model of continuous drying is established from general conservation equations with the main approximation that the air is rapidly extracted. The two constitutive equations of the model which describe temperature and water content fields are of a diffusive type and coupled through coefficients. The adequate boundary equation is not a convective one, but expresses a hygroscopic equilibrium between the vapour in the chamber and the wood surface. The mass diffusive coefficient can be adjusted to the drying rates through capillary pressure and bound water diffusion functions. The wood heterogeneity (seasonal growth) is the main factor of discrepancy in these functions. The simulated drying rates correspond with the experimental ones.

Keywords and phrases ::

• diffusion coefficients
• experiments
• model
• moisture profiles
• simulation