Interlaborafory Comparison of Formaldehyde Emissions from Particleboard Underlayment in Small-Scale Environmental Chambers

Abstract

Formaldehyde (CH₂O) emissions from particleboard underlayment have been measured in 0.17 and 0.2 m³ chambers at separate laboratories to test the comparability of small scale environmental chamber measurements under different ventilation and product loading conditions. Absolute CH₂O calibration was established through intermethod comparison of different monitoring techniques against a CH₂O generation apparatus. Interlaboratory precision was enhanced via co-calibration of each laboratory’s CH₂O colorimetric analyzer against the same blank and bi-level generation source at the beginning and end of the study. The results show excellent intermethod and interlaboratory agreement in both the CH₂O calibration and particleboard emissions testing. The CH₂O emission rates of the test specimens demonstrate a Fick’s Law dependence on CH₂O vapor concentration. Measured CH₂O concentrations are described by a single-compartment, single emitter model, and are inversely proportional to the ratio [N/L (m/h)] of the air exchange rate [N(h^-1)] and product loading [L(m^-1)]. Comparison tests at varying N and L, but uniform N/L were performed; similar CH2O concentrations were measured for N and L levels selected from an indoor compartment model, and for fivefold larger N and L values, which are more convenient for small-scale chamber testing.