Publication Cover
Inhalation Toxicology
International Forum for Respiratory Research
Volume 31, 2019 - Issue 3
157
Views
5
CrossRef citations to date
0
Altmetric
Research Article

Evaluation of the amount of nanoparticles emitted in LASER additive manufacture/welding

ORCID Icon, ORCID Icon, ORCID Icon, ORCID Icon & ORCID Icon
Pages 125-130 | Received 23 Nov 2018, Accepted 13 May 2019, Published online: 10 Jun 2019
 

Abstract

Objectives: The objective of this study was the evaluation of the professional exposure to nanoparticles during tasks performed in workstations for production of metallic parts by laser welding additive manufacturing.

Materials and methods: The study was developed in an installed additive manufacturing machine, having controlled temperature and humidity in an industrial unit where metal parts were being produced using stainless steel powders of granulometry of 10 to 35 μm.

Results and discussion: Monitoring of airborne nanoparticles emission was made using adequate equipment, which showed considerable number of nanoparticles over the baseline, having the same composition as the steel powder used.

Conclusion: It is concluded that the values of professional exposure to nanoparticles are high in these workstations and that the nanoparticles to which the workers are exposed are small in size (around 15 nm), thus having a strong capacity for alveolar penetration and, consequently, with a strong possibility of passing to the bloodstream, accumulating in the body.

Disclosure statement

No potential conflict of interest was reported by the authors.

Additional information

Funding

The authors acknowledge the support of EU Project CERASAFE ERA-NET SIINN/0002/2014. The authors also acknowledge the support of the CERENA strategic project (strategic project FCT-UID/ECI/04028/2019).

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.