209
Views
5
CrossRef citations to date
0
Altmetric
Original Articles

Reduction of the excess sludge production by biological alternating process: real application results and metabolic uncoupling mechanism

&
Pages 137-148 | Received 13 Mar 2014, Accepted 23 Jun 2014, Published online: 21 Jul 2014
 

Abstract

The biological solution proposed to reduce the wasted sludge production is based on a process of alternating phases realized in a specific reactor (alternate cycles in sludge line (ACSL)) where a quote of the recycle sludge is treated and sent back to the main activated sludge process. The ACSL process was applied in two urban wastewater treatment plants (WWTPs). The reduction was tested by changing the hydraulic retention time and the conditions of oxidation reduction potential. The main mechanism of the process is recognized in the metabolic uncoupling. In fact, an increase in the specific oxygen uptake rate in the biological reactors was recorded (up to 20 mg/g VSS/h), which was stimulated by the fasting condition in the ACSL. The process is able to reduce the observed sludge yield on average of 25–30% with final average values reaching 0.179 kg VSS/kg chemical oxygen demand (COD) for WWTP1 and 0.117 kg VSS/kg COD for WWTP2.

Acknowledgements

The authors gratefully acknowledge the EC Project ‘Novel processing routes for effective sewage sludge management’ for the support to the activities.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.