61
Views
4
CrossRef citations to date
0
Altmetric
Original Articles

Removal of Helminth Eggs in an Advanced Primary Treatment with Sludge Blanket

Pages 1061-1071 | Published online: 11 May 2010
 

Abstract

This paper describes the application of a physicochemical system, based on advanced primary treatment (APT) to remove Helminth eggs and faecal coliforms from domestic wastewater in order to obtain an effluent suitable for agricultural reuse. The system comprises a coagulation-flocculation unit, with a high rate sedimentation tank and a sludge blanket (Densadeg) along with a system of sand filtration and chlorine disinfection. It was found that the Densadeg reduced the Helminth eggs from 22.6 HE l−1 to 1.2 HE l−1 with hydraulic loads of up to 1440 m3 m−2 d−1 (60 m h−1) in the sedimentation tank, which are far greater than those which have been described previously. The water quality of this effluent is suitable for the irrigation of crops which are not consumed raw. To achieve values recommended by the WHO, <1 HE l−1 and 1000 MPN/100 ml faecal coliforms (FC), for crops which are consumed raw, it is necessary to filter the effluent to obtain 0.27 HE l−1 and apply 17 mg l−1 of chlorine with a contact time of one hour. In the whole treatment system, the organic matter is partially reduced (from 389 to 160 mgCOD l−1), as is the nitrogen (from 39 to 17 mgN l−1) and phosphorus (from 12 mg P-PT l−1 to 7 mg l−1). Hence the advantages of using wastewater for agricultural irrigation are maintained, but without the associated microbiological risks.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.