企業界導入電腦整合製造系統之實用性規劃程序

摘要

本研究提出一套企業導入電腦整合製造系統之工程程序。在程序發展中分別結合了理論模式(MODEL)、 系統工程程序(PROCEDURE)和模組化應用工具(ENABLER),以兼顧嚴謹性，系統性和應用性三方面之要求。在CIM導入工程程序的發展上，分爲分析和規劃設計兩階段。先用IDEF0進行活動分析，再以產出表單之規範爲中心，來進行導入程序之規劃設計；最後利用PERT圖，將整個規劃程序之先後順序顯示淸楚。藉著PERT圖，可就CIM規劃所需之人力資源、成本和時間等項目逐一進行估計，並作爲執行和控制之根據。

Abstract

This paper proposes a practical engineering procedure for introducing the Computer-Integrated Manufacturing System into the enterprise in Taiwan. The concept of MODEL, PROCEDURE and ENABLER has been incorporated into the developing process respectively, to meet the requirements of preciseness, systemization and applicability simultaneously. The development of the PROCEDURE was divided into two stages: the analysis stage and the design stage. The IDEFO software was utilized to perform the activity-bred analysis first, and then the required output figures and tables were used to design the PROCEDURE. Finally, the PERT chart was introduced to construct the planning process. The required human resource, costs and time in the planning of a CIM system can be indicated in the PERT chart, which can also serve for the execution and control purposes.

關鍵字:

• 電腦整合製造系統
• 系統工程程序
• 整合模式
• 功能模組

Key words:

• CIM System
• PCIMS PROCEDURE
• PCIMS MODEL
• PCIMS ENABLER