418
Views
5
CrossRef citations to date
0
Altmetric
Articles

Viscoelastic transitions exhibited by modified and unmodified bitumen

, ORCID Icon &
Pages 766-780 | Received 26 May 2018, Accepted 30 May 2018, Published online: 24 Aug 2018
 

ABSTRACT

The working temperature of a bituminous pavement can typically range from 75C to 20C. Bitumen shows a wide spectrum of mechanical behaviour in this temperature range and these include those of a viscoelastic fluid, a viscoelastic solid and an elastic solid. Due to the amorphous nature of the material, the transitions between such mechanical responses are gradual. This investigation focuses on the transition between the viscoelastic solid and the viscoelastic fluid state of a wide class of bitumens with regard to unaged and short-term aged conditions. An unmodified binder and three modified binders were subjected to temperature sweep and frequency sweep in the viscoelastic regime across a wide range of temperatures. Depending on the material and the post-processing method followed, one could discern a viscoelastic fluid and a viscoelastic solid regime and a frequency-dependent mixture regime consisting of a viscoelastic solid and a viscoelastic fluid, across the tested temperatures and frequencies. It is shown in this investigation that parameters such as G–G′′ crossover and frequency independence of tan δ cannot be used to estimate the temperatures corresponding to the onset of either fluid-like or solid-like behaviour of the body as the temperature varies. It is also shown that the time–temperature superposition principle does not hold good in the temperature regime tested (75–25C) due to the viscoelastic transitions exhibited by bitumen and modified bitumen.

Disclosure statement

No potential conflict of interest was reported by the authors.

ORCID

J. Murali Krishnan http://orcid.org/0000-0002-7091-5930

Additional information

Funding

This work was supported by Science and Engineering Research Board, Department of Science and Technology, Govt. of India [DST/TSG/STS/2011/46].

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.