![Sample our Engineering & Technology journals, sign in here to start your access, latest two full volumes FREE to you for 14 days]({"type":"image" , "src" : "/sda/5933/TOC-Subject-Sample-2021-Engineering-Tech.jpg"})
ABSTRACT
Pavements skid resistance, especially in wet states, is an essential indicators of traffic safety. However, the existing testers cannot reflect actual road friction situations and oversimplify water’s effect on texture and skid resistance. Therefore, this study compared a traditional British pendulum tester (BPT) with actual vehicle braking. A simplified water coverage simulation programme was proposed, and the BPT characterised the influence of different thin water films on skid resistance in the laboratory. Besides, several freshly constructed road sections (AC-13, SMA-13, and PAC-13) were tested with both BPT and vehicle braking during rainfall. The results showed that water film, even thin, is unfavourable for pavement skid resistance. The BPT results were inconsistent with that of the vehicle braking. Because the tribological properties characterised by BPT are provided by micro-texture and partly macro-texture within the rubber-texture interaction depth (0.1 mm). Larger texture depth and more tortuous and connected pores will offer pavements larger water capacity and higher water permeability, which is beneficial for alleviating braking distance reduction during rainfall. In general, an ideal skid resistance tester should consider characteristics within the rubber-texture contact depth and should consider braking conditions such as speed, water film thickness, drainage method, and slip rate.
Disclosure statement
No potential conflict of interest was reported by the author(s).
Data availability statement
The authors confirm that the data supporting the findings of this study are available within the article.
Correction Statement
This article has been corrected with minor changes. These changes do not impact the academic content of the article.