![Sample our Engineering & Technology journals, sign in here to start your access, latest two full volumes FREE to you for 14 days]({"type":"image" , "src" : "/sda/5933/TOC-Subject-Sample-2021-Engineering-Tech.jpg"})
Abstract
Blisters that develop on carbon-graphite mechanical seal faces are irregularities in surface topography that result in poor sealing performance and a high incidence of catastrophic failure. On first inspection, a blister is a burnished area that is slightly elevated above the surrounding seal surface. In this study, the topography of several hundred blisters was examined with interference microscopy. The shape of the burnished area is typically elliptical or cylindrical. The leading edge against the direction of rotation of the mating seal ring extends abruptly upward from the surrounding seal surface. The trailing surface gradually merges into the parent seal face. Most blisters have a maximum height of 0.25 μm to 0.75 μm (10 μ-in to 30 μ-in).
Presented at the 55th Annual Meeting Nashville, Tennessee May 7–11, 2000
KEY WORDS:
Notes
Presented at the 55th Annual Meeting Nashville, Tennessee May 7–11, 2000