An Analytical Solution for Elastic and Elastic-Plastic Contact Models

Abstract

In tribology often a closed form solution for calculation of contact stress and real contact area is required for the purposes of, for example, developing wear maps and temperature profiles at asperities. In assuming a Gaussian distribution of asperity heights it is not possible to obtain an analytical solution for the contact load and real contact area for many analytical models such as those developed by Greenwood and Williamson (elastic model), Chang, et al. (elastic-plastic model) and Horng (elliptic elastic-plastic model). In this paper, two exponential functions have been derived from a fitting procedure applied to the numerical results of the Gaussian height distribution thus offering an analytical expression for the above three models. It has been demonstrated that the two exponential functions (φ₂* and φ₄*) can give a fair approximation to the contact load and the real contact area in the separation of 0 to 4σ. In addition, variations in plasticity index (ψ) and effective asperity radius (γ) do not significantly affect the approximated accuracy. The results obtained by the newly derived exponential functions have been compared with the exponential function φ₁*; suggested by Greenwood and Williamson, 1966 and it has been shown that use of φ₁* invariably gives a larger error than using two exponential functions over two ranges of separation distances.

Presented as a Society of Tribologists and Lubrication Engineers Paper at the ASME/STLE Tribology Conference in Seattle, Washington, October 1–4, 2000

KEY WORDS:

• Analytical Solution
• Asperity Height Distribution
• Elastic-Plastic Contact

Notes

Presented as a Society of Tribologists and Lubrication Engineers Paper at the ASME/STLE Tribology Conference in Seattle, Washington, October 1–4, 2000