Thermal Management Techniques for Oil-Free Turbomachinery Systems

Abstract

Tests were performed to evaluate three different methods of utilizing air to provide thermal management control for compliant journal foil air bearings. The effectiveness of the methods was based on bearing bulk temperature and axial thermal gradient reductions during air delivery. The first method utilized direct impingement of air on the inner surface of a hollow test journal during operation. The second, less indirect method achieved heat removal by blowing air inside the test journal parallel to the shaft axis to simulate air flowing axially through a hollow shaft. The third method emulated the most common approach to removing heat by forcing air axially through the bearing's support structure. Internal bearing temperatures were measured with three type K thermocouples embedded in the bearing that measured general internal temperatures and axial thermal gradients. Testing was performed in a 1 atm, 260°C ambient environment with the bearing operating at 60 krpm, and supporting a load of 222 N. Air volumetric flows of 0.06, 0.11, and 0.17 m³/min at approximately 150 to 200°C were used.

The tests indicate that all three methods provide thermal management but at different levels of effectiveness. Axial cooling of the bearing support structure had a greater effect on the bulk temperature for each air flow and demonstrated that the thermal gradients could be influenced by the directionality of the air flow. Direct air impingement on the journal's inside surface provided uniform reductions in both bulk temperature and thermal gradients. Similar to the direct method, indirect journal cooling had a uniform cooling effect on both bulk temperatures and thermal gradients but was the least effective of the three methods.

KEY WORDS:

• Foil Air Bearing
• Gas Bearing
• Turbomachinery

Acknowledgments

Presented at the STLE Annual Meeting in Calgary, Alberta, Canada May 7-11, 2006, Review led by Waldek Dmochowski