383
Views
0
CrossRef citations to date
0
Altmetric
Corrigendum

Corrigendum

This article refers to:
Transient Pressure and Temperature Field Measurements in a Lightly Loaded Circumferential Groove Journal Bearing from Startup to Steady-State Thermal Stabilization

Article title: Transient Pressure and Temperature Fields Measurements in a Lightly Loaded Circumferential Groove Journal Bearing from Start-up to Steady-State Thermal Stabilization

Authors: Alex-Florian Cristea, Jean Bouyer, Michel Fillon, and Mircea D. Pascovici

Journal: Tribology Transactions

DOI: 10.1080/10402004.2016.1241330

Figure 7a–d appeared out of order in the print and online versions of this manuscript. The correct order for the images is as follows:

Figure 7a–d. Numerical reconstruction of the transient experimental film pressure and temperature fields. Focus on a startup to stabilization and thermal equilibrium for low-load/high-speed case. Contour map (isobars in megapascal, isotherms in degrees Celsius) for 1 kN/4,000 rpm (t)/0.2 MPa (r)/30°C/4 mm at the CGJB front land.

Figure 7a–d. Numerical reconstruction of the transient experimental film pressure and temperature fields. Focus on a startup to stabilization and thermal equilibrium for low-load/high-speed case. Contour map (isobars in megapascal, isotherms in degrees Celsius) for 1 kN/4,000 rpm (t)/0.2 MPa (r)/30°C/4 mm at the CGJB front land.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.