Mechanical and Tribological Properties of Ca/P-Doped Titanium Dioxide Layer Produced by Plasma Electrolytic Oxidation: Effects of Applied Voltage and Heat Treatment

ABSTRACT

Plasma electrolytic oxidation (PEO) is a technique that produces a hard oxide layer on the titanium surface where its properties can be tailored by changing the process parameters or by a posterior heat treatment (HT). In this work, a TiO₂ layer with different crystallinity was produced by PEO with different applied voltages (250 to 400 V) and post-HT at 600°C. Our aim was to evaluate the influence of the PEO voltage and HT on the mechanical and tribological properties of anodized Ti. There is an increase in pore size, oxide thickness, and Ca/P ratio for the oxide layer with the applied voltage during the PEO process. X-ray diffraction (XRD) results indicated an increase in the crystalline rutile phase in the oxide layer with voltage and HT. Nanoindentation shows an increase in the oxide hardness and elastic modulus with increased voltage and HT, leading to an improvement in the wear resistance.

KEYWORDS:

• Titanium
• wear
• PEO
• rutile
• nanoindentation

Additional information

Funding

This work was supported by the Brazilian National Council for Scientific and Technological Development (CNPq), Grants 577445/2008 and 471395/2012-9.