Publication Cover
Numerical Heat Transfer, Part A: Applications
An International Journal of Computation and Methodology
Volume 65, 2014 - Issue 7
1,452
Views
47
CrossRef citations to date
0
Altmetric
Original Articles

Effectiveness Study of a Shell and Tube Heat Exchanger Operated with Nanofluids at Different Mass Flow Rates

, , , , &
Pages 699-713 | Received 25 Jun 2013, Accepted 01 Sep 2013, Published online: 10 Jan 2014
 

Abstract

Several challenging issues, such as global warming, greenhouse effect, fuel security, and the high price of energy, motivate people to think about energy savings. Energy can be saved by effectively using available materials and facilities. Heat exchangers play a significant part in the field of energy conservation, conversion, and recovery. Nanofluids can be used in the heat exchangers to reduce global energy losses. Thermal performance of a shell and tube heat exchanger operated with nanofluids has been analytically investigated at different mass flow rates and compared with water as the base fluid. Suspensions of ZnO, CuO, Fe3O4, TiO2, and Al2O3 nanoparticles in water (W) at 0.03 volumetric fractions have been considered. It is found that, for a certain mass flow rate (50 kg/min) of tube side and shell side fluid, the highest heat transfer coefficient (h) belongs to Al2O3-Wnanofluid and the lowest to CuO-W nanofluid. However, maximum energy effectiveness (ϵ) improvement took place by 43% for ZnO-W nanofluid and minimum ϵ improvement that was around 31% happened for Al2O3-W nanofluid. Furthermore, this energy effectiveness also improved with the decrease of the mass flow rates of nanofluids and increasing the mass flow rates of the base fluid. However, changing the base fluid's mass flow rate has a limited effect on this improvement of energy effectiveness. For example, a maximum overall heat transfer coefficient was found to vary from 18.31 to 18.35 W/m² · K for Al2O3-W nanofluid when changing the mass flow rate of nanofluid from 50 to 70 kg/min. On the other hand, with the same changes of hot water mass flow rates, a maximum overall heat transfer coefficient was obtained to shift from 18.31 to 22 W/m².K for the same nanofluid. Viscosity and specific heat of nanofluids are responsible for these phenomena. However, energy effectiveness of the shell and tube heat exchanger can be increased by using metal oxide nanofluids, and better performance can be achieved by maintaining higher mass flow rates of shell side fluid and lower mass flow rates for tube side fluid.

Acknowledgments

The authors would like to acknowledge the Ministry of Higher Education Malaysia (MoHE) for its financial support. This work was supported by the UM-MoHE High Impact Research Grant Scheme (HIRG) (Project No.: UM.C/HIR/MOHE/ENG/40 (D000040-16001)).

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.