Confined flow past heated square cylinder for various inclination of lateral sides

Abstract

In the present study, the effect of taper on the lateral sides on fluid flow and heat transfer characteristics on a square cylinder has been analyzed numerically. Two-dimensional simulations have been carried out in the laminar flow regime (Re 100–800) for divergent blockage ratios (ϵ = H/D) and taper angles on the forward and backward sides of the lateral cylinder. Compared to the square cylinder, the forward tapered modification cylinders led to significant total drag reductions, pressure drop, and higher heat dissipation for low Re. The backward taper cylinder illustrates a minor increase in heat dissipation; however, the high drag coefficient and pressure drop penalty cannot be neglected. Moreover, an optimized geometry has been identified as a function of all the parameters. The reduction in blockage ratio has been determined to suppress the vortex shedding for higher Re completely. Results also indicate that the decrease in blockage ratio reduces the critical Re of the domain. The slightly tapered surfaces on either side of the square geometry significantly influence heat transfer and apply to modern industrial electronics and their cooling.

Keywords:

• Computational fluid dynamics
• confinement
• convection heat transfer
• Nusselt number
• square cylinder

Disclosure statement

We confirm that the manuscript has been read and approved by all named authors and that there are no other persons who satisfied the criteria for authorship but are not listed. We further confirm that all have approved the order of authors listed in the manuscript of us.

Additional information

Funding

This research was supported by the Product development laboratory and Computational Fluid Dynamics Laboratory of the SRM Institute of Science and Technology. These supports are gratefully acknowledged.