EFFECT OF VARIOUS DRIVING FORCES ON HEAT AND MASS TRANSFER IN ARC WELDING

Abstract

In this study the heat transfer and fluid flow of the molten pool in stationary gas tungsten arc welding using argon shielding gas were investigated. Transporting phenomena from the welding arc to the base material surface, such as current density, heat flux, arc pressure, and shear stress acting on the weld pool surface, were taken from the simulation results of the corresponding welding arc. Various driving forces for the weld pool convection were considered: self-induced electromagnetic, surface tension, buoyancy, and impinging plasma arc forces. Furthermore, the effect of surface depression due to the arc pressure acting on the molten pool surface was considered. Because the fusion boundary has a curved and unknown shape during welding, a boundary-fitted coordinate system was adopted to precisely describe the boundary for the momentum equation. The numerical model was applied to AISI304 stainless steel and compared with the experimental results.

Notes

Address correspondence to Professor Suck-Joo Na, Department of Mechanical Engineering, Korea Advanced Institute of Science and Technology, Kusong-dong 373-1, Yusong-gu, Taejon, 305-701 Korea. E-mail: [email protected]