Superior Pillared Clay Catalysts for Selective Catalytic Reduction of Nitrogen Oxides for Power Plant Emission Control

ABSTRACT

Fe³+-, Cr³+-, Cu²+-, Mn²+-, Co²+-, and Ni²+-exchanged Al₂O₃-pillared interlayer clay (PILC) or TiO₂-PILC catalysts are investigated for the selective catalytic reduction (SCR) of nitric oxide by ammonia in the presence of excess oxygen. Fe³+-exchanged pillared clay is found to be the most active. The catalytic activity of Fe-TiO₂-PILC could be further improved by the addition of a small amount of cerium ions or cerium oxide. H₂O and SO₂ increase both the activity and the product selectivity to N₂. The maximum activity on the Ce-Fe-TiO₂-PILC is more than 3 times as active as that on a vanadium catalyst. Moreover, compared to the V₂O₅-WO₃/TiO₂ catalyst, the Fe-TiO₂-PILC catalysts show higher N₂/N₂O product selectivities and substantially lower activities (by ~85%) for SO₂ oxidation to SO₃ under the same reaction conditions. A 100-hr run in the presence of H₂O and SO₂ for the CeO₂/Fe-TiO₂-PILC catalyst showed no decrease in activity.