515
Views
4
CrossRef citations to date
0
Altmetric
Technical Paper

Partition of Volatile Organic Compounds in Activated Sludge and Wastewater

&
Pages 1083-1090 | Published online: 27 Feb 2012
 

Abstract

The Henry’s law constant is important in the gas-liquid mass transfer process. Apparent dimensionless Henry’s law constant, or the gas-liquid partition coefficient (K’ H), for both hydrophilic (methanol, isopropyl alcohol, and acetone) and hydrophobic (toluene and p-xylene) organic compounds in deionized (DI) water, a wastewater with a maximum total dissolved organic carbon (DOC) content of 700 mg/L, and DI water mixed with a maximum activated sludge suspended solid (SS) concentration of 40,000 mg/L were measured using the single equilibrium technique at 293 K.

Experimental results demonstrate that the K’ H of any of the test volatile organic compounds varied among three situations. First, the KH of the hydrophilic compounds in mixed liquor with the maximum SS concentration was 9–21% higher than those in DI water. Second, those for toluene and p-xylene were 77% and 93% lower, respectively, in the mixed liquor with the maximum SS concentration. Third, the KH values of all of the test compounds in the wastewater were only 10% lower than those in DI water.

A model was developed to relate K’ H with wastewater DOC and the SS concentration in the activated sludge using an organic carbon-water partition coefficient and activated sludge-water partition coefficient as model parameters. The model was verified and model parameters for test compounds estimated.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.