Publication Cover
Integrated Ferroelectrics
An International Journal
Volume 97, 2008 - Issue 1
80
Views
2
CrossRef citations to date
0
Altmetric
SESSION D2: HIGH-K DIELECTRICS AND ELECTRODES

EFFECT OF THE OXYGEN ADDITION IN THE SPUTTERING GAS ON THE DIELECTRIC PROPERTIES OF a-BaTiO3 FILMS

, , &
Pages 121-128 | Received 15 Jun 2007, Accepted 15 Dec 2007, Published online: 20 Sep 2010
 

ABSTRACT

Amorphous barium titanate films (a-BTO) were grown by the RF magnetron sputtering technique at low temperature and under various oxygen/argon mixing ratios (OMR). Their dielectric properties (dielectric constant, loss and ac conductivity in the 0.1–105 Hz range), dc leakage currents, and thermally stimulated currents were systematically studied as a function of OMR in the sputtering gas (0% to 20 %). We demonstrate that the presence of oxygen plays a significant role in improving the dielectric properties of a-BTO thin films. The oxygen incorporation successfully suppressed some electrical defects. The bulk conductivity and leakage currents are reduced although a small decrease of dielectric constant has been observed. Films prepared at higher oxygen ratio (20%) have a small leakage current density (3.6 × 10− 7 A/m2) and lower tangent loss (2 × 10− 3).

ACKNOWLEDGMENTS

Authors would like to acknowledge the Région Rhône-Alpes (MIRA project) for the financial support.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.