Characterisation of stress concentration of ferromagnetic materials by metal magnetic memory testing

Abstract

The relationship between the degree of stress concentration and the H _p(y) signals of metal magnetic memory was investigated by tension–tension fatigue tests. Sheet specimens of 45CrNiMoVA steel were machined and two types of notches were cut into them to obtain two stress concentration factors. During the testing process, H _p(y) signals were collected from three measured lines on the specimen surface. In the absence of a precut notch, the H _p(y) signal curve of a measured line at the central position was linear. However, the H _p(y) signal curves of measured lines near a precut notch or across a notch showed a distribution of abnormal magnetic peaks. The magnetic gradient K of the abnormal magnetic peaks was found to increase as the stress concentration factor increased. This feature could potentially be used to characterise the degree of stress concentration of ferromagnetic materials.

Keywords:

• ferromagnetic material
• metal magnetic memory
• stress concentration
• magnetic abnormal peak

Acknowledgements

The authors would like to thank a main project of National Natural Science Foundation of China (Grant Nos 50735006), an ordinary project of National Natural Science Foundation of China (Grant Nos 50505052) and 973 Project (2007CB607601).