246
Views
8
CrossRef citations to date
0
Altmetric
Original Articles

Evaluation of 1-G Similitude Law in Predicting Behavior of a Pile-Soil Model

, , , &
Pages 202-211 | Received 20 Jan 2013, Accepted 22 Jul 2013, Published online: 25 Nov 2014
 

Abstract

A series of 1-g shaking table tests was performed using a pile-soil model to verify the existing similitude law used in 1-g shaking table tests. Modeling of the model technique was used for three different sizes of the model, manufactured according to Iai's similitude law, and tests were carried out while varying input parameters, such as input frequency and input ground acceleration. Evaluation of the accuracy of Iai's scaling factor of a frequency showed that the maximum error in the converted frequency could be within 17%, 35% and 55% when the scaling factor is 2, 5 and 20, respectively. Combining the error occurring in the estimation of frequency, with the possible error occurring in the test results, the maximum error was found to be less than 9%, 21% and 59% when the scaling factor was 2, 5, and 20, respectively, when the frequency ratios in the model tests were smaller than 0.6. Therefore, it can be concluded that the 1-g shaking model test, based on Iai's similitude law, can be used on a quantitative basis to predict the dynamic behavior of a pile foundation.

Notes

*Flexural rigidity applied in the tests.

**Flexural rigidity required to satisfy Iai's similitude law.

Color versions of one or more of the figures in the article can be found online at www.tandfonline.com/umgt.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.