Characterization of the temperature distribution of a polymer permanent magnet synchronous motor with a fiber Bragg grating (FBG)

Abstract

This article reports a distributed thermal monitoring approach for permanent magnet synchronous motors (PMSMs). The detecting system is based on using an electrically non-conductive and electromagnetic interference-free fiber Bragg grating (FBG) temperature sensor embedded in the stator of PMSMs. FBG thermal sensors with different annealing temperature were fabricated and integrated with a motor stator, and their accuracy for temperature measurement was evaluated. According to the experimental results, the error within 200 °C is limited between −6 °C and 2 °C when the annealing temperature is 95 °C, and the error decreases to ±1 °C when the annealing temperature is 120 °C, indicating that performance of FBG thermal sensor is improved by increasing the annealing temperature. This article provides methodogical guidance for improving the accuracy of stator temperature distribution measurements based on the FBG thermal sensor.

Keywords:

• Polymer permanent magnet synchronous motor (PMSM)
• temperature distribution
• fiber Bragg grating (FBG)
• stator winding

Acknowledgments

The authors also wish to thank Beijing Information Science and Technology University for the help in FBG sensor technical support.

Disclosure statement

No potential conflict of interest was reported by the authors.

Data availability

The data that support the findings of this study are available from the corresponding author upon reasonable request.

Additional information

Funding

This work was supported by Natural Science Foundation of Hubei Province under Grant ZRMS2020001244 and National Natural Science Foundation of China under Grant 51825703, Grant 51690181.