Mineral and chemical characteristics, textural parameters, and the mobility of the selected elements of flotation waste, originating from the Polish copper-mining industry

ABSTRACT

This article discusses the mineralogy and geochemical characteristics of the fresh copper-flotation waste samples. The mobility of As, Cd, Cr, Cu, Ni, Pb, Tl, Zn was investigated by leaching tests. The main mineral phases identified concerned dolomite, quartz, clay minerals, feldspars, and copper-bearing minerals. Chemically, CaO and silica were dominating, along with a significant concentration of precious (Cu), refractory (Cr, Ti, V, Zr), and toxic (As, Cd, Pb) metals. Elements were bound mainly to the residual fraction and sulphides in the following order: Pb > Cu ≈ Tl > As ≈ Zn > Ni ≈ Cr > Cd. The metal mobility patterns expressed as a percentage of total concentrations, were as follows: Cd (42%) > Cr (26%)> Ni (24%) > Zn (23%) > As (22%) > Tl (20%) > Cu (18%) > Pb (2%). Those constituents were released earlier in lower pH values, although Cu, Cr, and Pb were also released in higher alkaline pH values. However, Zn release was not dependent on pH. When L/S values decreased, elements like As, Cr, Cu, Pb, and Tl were released. That process caused decrease of Cd, Ni, and Zn release.

KEYWORDS:

• copper flotation waste
• heavy metals
• geochemistry
• mobility
• leaching

Additional information

Funding

This research has been funded by AGH University of Science and Technology Statutory Research [Project No. 11.11.140.199].