Black Oil and Compositional Reservoir Simulation for Increasing the Recovery Performance of an Iranian Fractured Carbonate Reservoir

Abstract

Naturally fractured reservoirs contain a significant amount of world oil reserves. Accurate and efficient reservoir simulation of naturally fractured reservoirs is one of the most important, challenging, and computationally intensive problems in reservoir engineering. Black oil and compositional reservoir simulators have been used to determine the reservoir management and production strategies to increase the oil recovery from a low-porosity, low-permeability fractured carbonate reservoir, with an average matrix permeability of 0.8 md, average fracture permeability of 500 md, and an average matrix porosity of 10%. This reservoir is a candidate for an enhanced oil recovery (EOR) process, because the reservoir production rate has been declined due to increasing the water cut as a result of rising the water oil contact. The injection techniques that have been considered in this study for black oil model include (a) gas injection, (b) water injection, and (c) simultaneous water alternating gas injection and for the compositional model include (a) dry gas injection, (b) CO₂ injection, and (c) N₂ injection. Simulation results show that CO₂ injection has the maximum oil recovery between the EOR scenarios.

Keywords:

• black oil model
• CO₂ injection
• compositional model
• enhanced oil recovery (EOR)
• gas injection
• mobility ratio
• reservoir simulation
• water cut