Publication Cover
Journal of Environmental Science and Health, Part A
Toxic/Hazardous Substances and Environmental Engineering
Volume 41, 2006 - Issue 7
60
Views
5
CrossRef citations to date
0
Altmetric
Regular Articles

Heavy Metals Fractionation During the Thermophilic Phase of Sewage Sludge Composting in Aerated Static Piles

&
Pages 1235-1244 | Received 27 Dec 2005, Published online: 22 Sep 2006
 

Abstract

An aerated static pile system with temperature feedback control was used for the composting of sewage sludge amended with olive tree leaves in a 1:1 (SS1) and 1:2 (SS2) v/v ratio, on two different occasions. The two piles were approximate 20 m3 each of similar dimensions; 2.0 wide at the base, 1.3 m height and 11 m long. Samples were taken from the core of the piles on four occasions: day 0 (establishment), day 15, day 30 and day 60 of the thermophilic phase. Heavy metal (Cu, Ni, Pb and Zn) fractions in each of the samples were monitored using sequential extraction with H2O (for the water soluble fraction), KCL (for the exchangeable fraction), Na2EDTA (for the inorganic bound fraction), NaOH (for the organically bound fraction) and HNO3 due the significant residual fraction of these metals in both piles and in all four samplings, which reduced any losses through leaching when water was added. For Ni the water soluble and the exchangeable fractions were dominant, reaching values of 45% in SS1 and 35% in SS2, resulting in some losses into the leachates. The fraction of metals connected to the organic matter was similar for Ni in both piles, larger in SS2 for Pb than in SS1, whereas Cu and Zn presented far larger values in SS1 than in SS2. There was no common pattern of fractionation variation among the metals in each pile or when comparing both piles.

Notes

* are noted the largest percentages for each metal in SS1 where with

** are noted the largest percentages for each metal in SS2.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.