Publication Cover
Journal of Environmental Science and Health, Part A
Toxic/Hazardous Substances and Environmental Engineering
Volume 46, 2011 - Issue 13
205
Views
14
CrossRef citations to date
0
Altmetric
ARTICLES

Post-treatment of the permeate of a submerged anaerobic membrane bioreactor (SAMBR) treating landfill leachate

, &
Pages 1539-1548 | Received 12 Mar 2011, Published online: 12 Oct 2011
 

Abstract

In this study, various methods were compared to reduce the Chemical Oxygen Demand (COD) content of stabilised leachate from a Submerged Anaerobic Membrane Bioreactor (SAMBR). It was found that Powdered Activated Carbon (PAC) resulted in greater COD removals (84 %) than Granular Activated Carbon (GAC-80 %), an ultrafiltration membrane of 1kDa (75 %), coagulation-flocculation with FeCl3 and polyelectrolyte (45 %), FeCl3 alone (32 %), and polymeric adsorbents such as XAD7HP (46 %) and XAD4 (32 %). Results obtained on the <1 kDa fraction showed that PAC and GAC had a similar adsorption efficiency of about 60 % COD removal, followed by XAD7HP (48 %), XAD4 (27 %) and then FeCl3 (23 %). The post-treatment sequence UF+GAC would result in a final effluent with less than 100 mg COD/L. Size Exclusion Chromatography (SEC) revealed that the extent of adsorption of low MW compounds onto PAC was limited due to low MW hydrophilic compounds, whereas the kinetics of PAC adsorption depended mainly on the adsorption of high MW aromatics.

Acknowledgment

This research was supported by a grant from the Department of Environment, Food and Rural Affairs (DEFRA) in the UK.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.