Publication Cover
Journal of Environmental Science and Health, Part A
Toxic/Hazardous Substances and Environmental Engineering
Volume 47, 2012 - Issue 4
101
Views
2
CrossRef citations to date
0
Altmetric
ARTICLES

Effect of carbon sources on the removal of 1,1,2-Trichloroethane and 1,1,2,2-Tetrachloroethane in UASB reactor

&
Pages 638-644 | Received 26 Jul 2011, Published online: 29 Feb 2012
 

Abstract

The effect of two carbon sources namely sodium acetate and ethanol was studied in bench-scale Upflow Anaerobic Sludge Blanket (UASB) reactors for the removal of chlorinated ethanes i.e., 1,1,2-Trichloroethane (TCA) and 1,1,2,2-Tetrachloroethane (TeCA) contained in the simulated wastewaters. The Hydraulic Retention Time (HRT) was maintained as 24 hours in all the reactors. The granular biomass in the test reactors R2 and R3 were acclimated to 40 mg/L of TCA and 20 mg/L of TeCA, respectively. The effluent TCA and TeCA concentrations were 0.03 mg/L and 0.18 mg/L, respectively, at the end of acclimation phase. Sodium acetate and ethanol both were found to be suitable as the primary substrates in the biodegradation of TCA and TeCA. However, lower concentrations of the toxic pollutants (TCA and TeCA) were obtained in the effluents with the use of sodium acetate. The COD removal efficiency in the test reactors (R2 and R3) varied in the range of 95 % to 98.2 % accompanied by the formation of 1,2-Dichloroethane (DCA) as the major intermediate.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.