Optimization of coagulation-flocculation treatment on paper-recycling wastewater: Application of response surface methodology

Abstract

The application of coagulation-flocculation (CF) process for treating the paper-recycling wastewater in jar-test experiment was employed. The purpose of the study was aimed to examine the efficiency of alum and poly aluminum chloride (PACl) in combination with a cationic polyacrylamide (C-PAM) in removal of chemical oxygen demand (COD) and turbidity from paper-recycling wastewater. Optimization of CF process were performed by varying independent parameters (coagulants dosage, flocculants dosage, initial COD and pH) using a central composite design (CCD) under response surface methodology (RSM). Maximum set required 4.5 as pH, 40 mg/L coagulants dosage and 4.5 mg/L flocculants dosage at which gave 92% reduction of turbidity, 97% of COD removal and SVI 80 mL/g. The best coagulant and flocculants were alum and chemfloc 3876 at dose of 41 and 7.52 mg/L, respectively, correspondingly at pH of 6.85. These conditions gave 91.30% COD and 95.82% turbidity removals and 12 mL/g SVI.

Keywords:

• Coagulation-flocculation process
• RSM
• paper-recycling effluents

Acknowledgments

The study was funded through a research grant and supported by the Ministry of Science, Iran, Tarbiat Modares University (TMU). The authors wish thanks Mrs. Haghdoust (Technical assistant of Environmental Laboratory), Tarbiat Modares University and Ministry of Science for their financial support.