Publication Cover
Journal of Environmental Science and Health, Part A
Toxic/Hazardous Substances and Environmental Engineering
Volume 51, 2016 - Issue 7
641
Views
7
CrossRef citations to date
0
Altmetric
ARTICLES

Metals in agricultural produce associated with acid-mine drainage in Mount Morgan (Queensland, Australia)

, &
Pages 561-570 | Received 28 Sep 2014, Published online: 16 Mar 2016
 

ABSTRACT

Acid-mine drainage (AMD) into the Dee River from the historic gold and copper mine in Mount Morgan, Queensland (Australia) has been of concern to farmers in the area since 1925. This study sought to determine the levels of AMD-related metals and sulfur in agricultural produce grown near the mine-impacted Dee River, compare these with similar produce grown in reference fields (which had no known AMD influence), and assess any potential health risk using relevant Australian or US guidelines. Analyses of lucerne (Medicago sativa; also known as alfalfa) from five Dee fields showed the following average concentrations (mg/kg dry basis): Cd < 1, Cu 11, Fe 106, Mn 52, Pb < 5, Zn 25 and S 3934; similar levels were found in lucerne hay (used as cattle feed) from two Dee fields. All lucerne and lucerne hay data were generally comparable with levels found in the lucerne reference fields, suggesting no AMD influence; the levels were within the US National Research Council (US NRC) guidelines for maximum tolerable cattle dietary intake. Pasture grass (also cattle feed) from two fields in the Dee River floodplains gave mean concentrations (mg/kg dry) of Cd 0.14, Cu 12, Fe 313, Mn 111, Pb 1.4, Zn 86 and S 2450. All metal levels from the Dee and from reference sites were below the US NRC guidelines for maximum tolerable cattle dietary intake; however, the average Cd, Cu and Fe levels in Dee samples were significantly greater than the corresponding levels in the pasture grass reference sites, suggesting AMD influence in the Dee samples. The average levels in the edible portions of mandarin oranges (Citrus reticulata) from Dee sites (mg/kg wet weight) were Cd 0.011, Cu 0.59, Fe 2.2, Mn 0.56, Pb 0.18, S 91 and Zn 0.96. Cd and Zn were less than or close to, average Fe and Mn levels were at most twice, Cd 1.8 or 6.5 times, and Pb 8.5 or 72 times the maximum levels in raw oranges reported in the US total diet study (TDS) or the Australian TDS, respectively. Average Cd, Fe, Mn, Pb and Zn levels in the citrus reference samples were found to exceed the maximum reported in one or both TDS surveys. Cu, Fe, Mn, Pb and Zn plant-soil transfer factor (TF) values were < 1 for all agricultural samples from both Dee and reference sites, suggesting relatively poor transfer of these metals from soil to plant. In the case of Cd, TF values for Dee pasture grass and citrus fruit samples were 0.14 and 0.73, respectively; lucerne and lucerne hay from both Dee and reference sites gave TF = 10, suggesting some potential risk to cattle, although this conclusion is tentative because Cd levels were close to or less than the detection limit. TF values for S in lucerne, lucerne hay, pasture grass and mandarin oranges from Dee sites were 18, 14, 3 and 3.6, respectively, indicating that S in soil was readily available to plant or fruit. Sulfur in pasture grass and citrus fruit (TF = 11 for both) was apparently more bioavailable at the reference sites than at the Dee sites (TF = 3.0 for pasture grass; TF = 3.6 for citrus fruit).

Acknowledgments

The authors also gratefully acknowledge the kind assistance of Ms Roslyn Howse during the sampling exercises.

Funding

This project was funded by the Queensland Department of Natural Resources & Mines and the Wowan Dululu Landcare Group (Queensland).

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.