Publication Cover
Journal of Environmental Science and Health, Part A
Toxic/Hazardous Substances and Environmental Engineering
Volume 56, 2021 - Issue 13
262
Views
0
CrossRef citations to date
0
Altmetric
Research Article

Sulfur-based mixotrophic denitrification with the stoichiometric S0/N ratio and methanol supplementation: effect of the C/N ratio on the process

, , &
Pages 1420-1427 | Received 29 Jun 2021, Accepted 29 Oct 2021, Published online: 01 Dec 2021
 

Abstract

The impact of the organic carbon to nitrate ratio (C/N ratio) on mixotrophic denitrification rate has been scarcely studied. Thus, this work aims to investigate the effect of the C/N ratio on the mixotrophic denitrification when methanol is used as a source of organic matter and elemental sulfur as an electron donor for autotrophic denitrification. For this, two initial concentrations of NO3--N (50 and 25 mg/L) at a stoichiometric ratio of S0/N, and four initial C/N ratios (0, 0.6, 1.2, and 1.9 mg CH3OH/mg NO3- -N) were used at 25 (±2) °C. The results showed that when using a C/N ratio of 0.6, the highest total nitrogen removal was obtained and the accumulation of nitrites was reduced, compared to an autotrophic system. The most significant contribution to nitrate consumption was through autotrophic denitrification (AuDeN) for a C/N ratio of 0.6 and 1.2, while for C/N = 1.9 the most significant contribution of nitrate consumption was through heterotrophic denitrification (HD). Finally, organic supplementation (methanol) served to increase the specific nitrate removal rate at high and low initial concentrations of substrate. Therefore, the best C/N ratio was 0.6 since it allowed for increasing the removal efficiency and the denitrification rate.

Additional information

Funding

Authors would like to acknowledge the financial support provides by FONDECYT (Chile) under Project 1170103 and a PhD fellowship 21200655 awarded to D. Yanez-Sevilla.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.