A posteriori testing of the flame surface density transport equation for LES

Abstract

Flame Surface Density (FSD) models for Large Eddy Simulation (LES) are implemented and tested for a canonical configuration and a practical bluff body stabilised burner, comparing common algebraic closures with a transport equation closure in the context of turbulent premixed combustion. The transported method is expected to yield advantages over algebraic closures, as the equilibrium of subgrid production and destruction of FSD is no longer enforced and resolved processes of strain, propagation and curvature are explicitly accounted for. These advantages might have the potential to improve the ability to capture large-scale unsteady flame propagation in situations with combustion instabilities or situations where the flame encounters progressive wrinkling with time. The initial study of a propagating turbulent flame in wind-tunnel turbulence shows that the Algebraic Flame Surface Density (FSDA) method can predict an excessively wrinkled flame under fine grid conditions, potentially increasing the consumption rate of reactants to artificially higher levels. In contrast, the Flame Surface Density Transport (FSDT) closure predicts a smooth flame front and avoids the formation of artificial flame cusps when the grid is refined. Five FSDA models and the FSDT approach are then applied to the LES of the Volvo Rig. The predicted mean velocities are found to be relatively insensitive to the use of the FSDT and FSDA approaches, whereas temperature predictions exhibit appreciable differences for different formulations. The FSDT approach yields very similar temperature predictions to two of the tested FSDA models, quantitatively capturing the mean temperature. Grid refinement is found to improve the FSDT predictions of the mean flame spread. Overall, the paper demonstrates that the apparently complicated FSD transport equation approach can be implemented and applied to realistic, strongly wrinkled flames with good success, and opens up the field for further work to improve the models and the overall FSDT approach.

Keywords:

• premixed combustion
• large eddy simulation (LES)
• flame surface density (FSD)
• transported flame surface density equation

Acknowledgements

The authors acknowledge time on the Cray high performance computer operated by the Center for Computational Sciences and Simulation at Universitat Duisburg-Essen and supported by DFG.

Notes

¹The integral of the local reaction rate over the whole domain.

Additional information

Funding

The authors acknowledge financial support provided by the Engineering and Physical Sciences Research Council UK (ESPRC) [grant number EP/G008841/1, PhD+].