Bimorph piezoelectric vibration energy harvester with flexible 3D meshed-core structure for low frequency vibration

ABSTRACT

This paper proposes a bimorph piezoelectric vibration energy harvester (PVEH) with a flexible 3D meshed-core elastic layer for improving the output power while lowering the resonance frequency. Owing to the high void ratio of the 3D meshed-core structure, the bending stiffness of the cantilever can be lowered. Thus, the deflection of the harvester and the strain in the piezoelectric layer increase. According to vibration tests, the resonance frequency is 15.8% lower and the output power is 68% higher than in the conventional solid-core PVEH. Compared to the solid-core PVEH, the proposed meshed-core PVEH (10 mm × 20 mm × 280 μm) has 1.3 times larger tip deflection and the maximum output power is 24.6 μW under resonance condition at 18.7 Hz and 0.2G acceleration. Hence it can be used as a power supply for low-power-consumption sensor nodes in wireless sensor networks.

Graphical Abstract

KEYWORDS:

• Vibration energy harvester
• piezoelectric
• PVDF
• piezoelectric coupling analysis
• low frequency

CLASSIFICATION:

• 50 Energy materials
• 202 Dielectrics/Piezoelectrics/Insulators
• 206 Energy conversion/transport/storage/recovery

Disclosure statement

No potential conflict of interest was reported by the authors.

Additional information

Funding

This research was partially supported by JSPS Science Research Grant [JP17H03196] and JST PRESTO [Grant Number JPMJPR15R3].