Abstract
Creep cavitation in materials is greatly influenced by trace elements. To enhance creep cavitation resistance, the chemical composition of 304, 321, 347 austenitic stainless steels was modified with the addition of minute amounts of boron and cerium. The addition of boron and cerium to type 304 stainless steel led to an increase in its creep rupture life with an associated decrease in creep rupture ductility. The addition of boron and cerium to the titanium-containing 321 steel and niobium-containing 347 steel was found to increase their creep rupture life and ductility. Creep cavitation was highly suppressed in the 347 and 321 steels with the addition of boron and cerium. The chemistry of the grain boundary and creep cavity surface was analyzed by Auger electron spectroscopy. Extensive sulphur segregation was observed on the grain boundary and cavity surface of the steels without boron and cerium addition and even in the 304 steel containing boron and cerium. In the boron- and cerium-containing 347 and 321 steels, respectively, segregation of elemental boron and the BN compound on the cavity surface were observed. These segregations reduced cavity growth rate substantially in these steels and BN segregation was found to be more effective in reducing cavity growth rate than boron segregation. Cerium acts as a getter for soluble sulphur in the steels by precipitation of ceriumoxysulfide (Ce2O2S) to facilitate the segregation of boron on the cavity surface.
Acknowledgements
One of the authors (K. Laha) gratefully acknowledges the support of the Japanese Society for Promotion of Science (JSPS) for providing the JSPS postdoctoral fellowship for a foreign researcher to study at the National Institute for Material Science (Tsukuba, Japan).