135
Views
8
CrossRef citations to date
0
Altmetric
Original Articles

Nanoindentation studies on Ti–Zr–Ni bulk quasicrystalline intermetallics

, , &
Pages 3109-3115 | Received 15 Sep 2006, Accepted 29 Jan 2007, Published online: 02 Dec 2010
 

Abstract

Polycrystalline Ti40Zr40Ni20 bulk quasicrystals are used for microindentation and nanoindentation studies. The microindentation test gives the Meyer's hardness as 6.22 ± 0.16 GPa, but it does not exhibit any indentation size effect (ISE) nor any cracking, even at a higher 200g load. From nanoindentation tests, the reduced Young's modulus (Er) was found to vary from 115 to 124 GPa. Assuming suitable elastic constants of the indenter, the average Young's modulus (E) was determined to be 127 ± 6 GPa. Nanohardness appears to vary from 8.5 to 11.2 GPa over a wide range of load, indicating an indentation size effect at a nanoscale. The discontinuities in the plot (known as pop-ins or strain bursts) of P–h data, obtained from nanoindentation tests, are observed frequently and these are correlated with shear bands, which are observed under atomic force microscopy (AFM). The first pop-ins, observed in the load range 50–100 µN, led to the estimation of maximum shear stress as ∼8 GPa, close to the theoretical shear strength (∼E/25), and estimation of the energy as 0.67 eV/atom, which is required for elastic–plastic transition of this type of material. Thus, the pop-ins has been attributed to elastic–plastic transition during nanoindentation tests.

Acknowledgements

The authors thank Professor P. Paufler, Professor G.V.S. Sastry and Dr R.K. Mandal for useful discussions. The support of Department of Science and Technology, New Delhi, India is acknowledged.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.