644
Views
36
CrossRef citations to date
0
Altmetric
Original Articles

Crystallographic structure of vanadium carbide precipitates in a model Fe–C–V steel

, &
Pages 31-45 | Received 02 Aug 2007, Accepted 11 Oct 2007, Published online: 07 Dec 2007
 

Abstract

The crystallographic structure of vanadium carbide precipitates in iron is investigated using High Resolution Transmission Electron Microscopy (HRTEM) and conventional Selected Area Diffraction (SAD) analysis. After a two-step precipitation treatment (10 hours at 700°C and 10 days at 800°C) and different annealing treatments (from 870 to 920°C) performed on an ultra-pure Fe–V–C model alloy, carbides exhibit unambiguously the ordered monoclinic form V6C5. The often reported V4C3 structure, that refers to the pioneering work by Baker and Nutting is not encountered in the present investigation. Reasons for this contradiction are discussed, and the conclusion is drawn that no literature data are available to unambiguously support the existence of precipitates with the V4C3 structure.

Acknowledgements

The authors are grateful to the CLYME (Consortium Lyonnais de Microscopie Electronique) for access to the JEOL 2010F microscope. This work was financially supported by Ascometal and thanks are due to P. Dierickx (CREAS) for fruitful discussion.

Notes

†According to previous work on a similar steel, carbides as small as 3 nm have been successfully extracted Citation9.

†The iron austenitic matrix at 800°C turns into a ferrito-perlitic microstructure after slow air cooling.

†According to the basic assumptions that (i) the coarsening is limited by vanadium diffusion, and (ii) the characteristic diffusion distance ranges as , where D is the diffusion coefficient at a given temperature T ( for V in ferrite, and for V in austenite γ-Fe Citation1, with R equal to 8.32 J/K), 100 days at 700°C is ‘equivalent’ to 10 days at 800°C.

‡According to electrolytic dissolution and plasma spectroscopy, 80% of the vanadium is precipitated in that state Citation8.

†The initial Baker–Nutting Citation10 orientation relationship between precipitates and the ferritic matrix at 700°C (see ) has been lost during the subsequent coarsening treatment at 800°C in the austenitic domain.

‡More details on the M6C5 ordered phases are given in the appendix.

†This montage summarizes some of the ⟨110⟩fcc and ⟨112⟩fcc reciprocal lattice sections of the various forms of V6C5 as indexed in the disordered cubic structure. For the sake of brevity, only the most significant zone axes are shown. In the case of the monoclinic phase, it must be emphasized that the Citation032 M and diffraction patterns (respectively [101]fcc and [011]fcc) do not exhibit any superlattice reflections, which may correspond to what is observed in (as discussed in section 5).

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.