Organic/inorganic interfaced field-effect transistor properties with a novel organic semiconducting material

Abstract

A novel 1,3,4-oxadiazole-substituted benzo[b]triphenylene was synthesized by three-step synthetic procedure and OFET device design was successfully designed after theoretical calculations made using Gaussian software. For investigating the field-effect properties of designed organic electronic device, a SiO₂ (300 nm) was thermally grown on p-Si wafer at 1000 °C as a dielectric layer and gate, source and drain contacts have been deposited using Au metal with physical vapour deposition. 1,3,4-Oxadiazole-substituted benzo[b]triphenylene was spin coated on the source and drain electrodes of our device, forming organic/inorganic interfaced field-effect transistors. Surface morphology and thin film properties were investigated using AFM. All electrical measurements were done in air ambient. The device showed a typical p-type channel behaviour with increasing negative gate bias voltage values. Our results have surprisingly shown that the saturation regime of this device has high mobility (μ_FET), excellent on/off ratio (I_on/I_off), high transconductance (g_m) and a small threshold voltage (V_Th). The values of μ_FET, I_on/I_off, g_m and V_Th were found as 5.02 cm²/Vs, 0.7 × 10³, 5.64 μS/mm and 1.37 V, respectively. These values show that our novel organic material could be a potential candidate for organic electronic device applications in the future.

Keywords:

• OFET
• organic semiconductor
• benzo[b]triphenylene
• oxadiazole
• thin film
• mobility

Acknowledgements

This study was financially supported by Duzce University Scientific Research Projects (Project number: 2013.05.03.190) and Sakarya University Research Projects ( project number: 2014-02-02-001). We are grateful to Hayriye GENÇ and Yusuf ATALAY for theoretical parameters.