5
Views
25
CrossRef citations to date
0
Altmetric
Original Articles

Yield and recovery of the flux line lattice in a type II superconductor

&
Pages 339-357 | Received 12 Mar 1971, Published online: 02 Sep 2006
 

Abstract

Sweep rate dependent hysteresis is observed in the voltage–current curves of a deformed niobium crystal at 4·2°K. This phenomenon is investigated quantitatively by observing the current necessary to maintain a constant voltage V as a function of time. Increases in the current with time (recovery) occur following the imposition of a current in the flux flow regime, a decrease in magnetic field from above Hc2 or a rotation of the crystal in the field. Recovery proceeds at a rate roughly proportional to V, and no recovery occurs if V is held at zero. Decreases in the current (yield) occur if the magnetic field is increased from zero before V is imposed. The magnitude of the current drop at yield is proportional to V at low V and the yield time is proportional to V −1, although it is much shorter than the recovery time. Yielding is thought to result from the multiplication of flux-carrying defects, specifically flux line dislocation (FLD) dipoles, in the flux line lattice (FLL). The voltage- and time -dependence of yield are in agreement with the predictions of a theory of FLD dipole dynamics. Recovery is tentatively attributed to the purging of sources of FLD dipoles from regions of low pin density within the crystal.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.