8
Views
11
CrossRef citations to date
0
Altmetric
Original Articles

Permeation of Protective Clothing Materials: Comparison of Liquid Contact, Liquid Splashes and Vapors on Breakthrough Times

, , &
Pages 551-555 | Published online: 04 Jun 2010
 

Abstract

A disturbing number of common liquid chemicals permeated the best available protective clothing material when evaluated by the ASTM Standard Test Method F739-81. Since this method involved continuous liquid contact during the 3-hr test used by the Coast Guard, it was considered unusually severe. The question then arose as to whether intermittent contact — better approximating conditions likely to be encountered in real-world situations — would give usable breakthrough times (longer than pure liquid). Comparative tests were conducted with liquid exposure for 3 hr, and three levels of intermittent exposure (splashes every 15 min or every 30 min until breakthrough, or a single initial splash), and with saturated vapor at 25°C and 0°C [decreasing amounts of exposure]. Chemicals displayed two distinct modes of behavior. In one mode, the results were as might be expected; the more prolonged or concentrated the liquid contact, the faster the breakthrough. In the other mode, there was little difference between a single splash and continuous liquid contact. In the latter case, it was observed that the liquid wet the surface of the clothing material. There are serious implications in the second mode of behavior, riot only for those wearing totally encapsulated suits, but for those wearing protective gloves. The work reported here is the basis for a proposed modification of the standard ASTM permeation test to include intermittent liquid contact (splash testing).

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.