On the second Piola-Kirchhoff and Cauchy stress tensors in nonlinear shells subjected to displacement-dependent loads

Abstract

In this article, a nonlinear geometrically exact (GeX) hybrid-mixed four-node solid-shell element under non-conservative loading using the sampling surfaces (SaS) method is developed. The term “geometrically exact” means that the parametrization of the middle surface is known and, therefore, the coefficients of the first and second fundamental forms and the Christoffel symbols are taken exactly at element nodes. The SaS formulation is based on the choice of N SaS parallel to the middle surface and located at Chebyshev polynomial nodes in order to introduce the displacements of these surfaces as fundamental shell unknowns. Such a choice of unknowns with the use of Lagrange polynomials of degree N–1 in the through-thickness distributions of displacements, strains, and stresses leads to an efficient higher-order shell formulation. To develop the hybrid-mixed four-node solid-shell element, which is free of shear and membrane locking, the Hu–Washizu variational principle is utilized. The proposed GeX hybrid-mixed solid-shell element subjected to follower loads shows superior performance in the case of coarse meshes and allows the use of only one load step in most of the considered numerical examples. It is established that the difference between the second Piola-Kirchhoff and Cauchy stresses in some non-conservative problems for isotropic and composite shells undergoing finite rotations can be significant.

Keywords:

• Finite deformation
• follower loads
• second Piola-Kirchhoff stress
• Cauchy stress
• solid-shell element
• sampling surfaces method

Additional information

Funding

This work was supported by the Russian Science Foundation under Grant No. 22-21-00030.