Evaluation of military helmets and roof padding on head injury potential from vertical impacts

ABSTRACT

Objective: Soldiers in military vehicles subjected to underbelly blasts can sustain traumatic head and neck injuries due to a head impact with the roof. The severity of head and neck trauma can be influenced by the amount of head clearance available to the occupant as well as factors such as wearing a military helmet or the presence of padding on the interior roof. The aim of the current study was to examine the interaction between a Hybrid III headform, the helmet system, and the interior roof of the vehicle under vertical loading.

Methods: Using a head impact machine and a Hybrid III headform, tests were conducted on a rigid steel plate in a number of different configurations and velocities to assess helmet shell and padding performance, to evaluate different vehicle roof padding materials, and to determine the relative injury mitigating contributions of both the helmet and the roof padding. The resultant translational head acceleration was measured and the head injury criterion (HIC) was calculated for each impact.

Results: For impacts with a helmeted headform hitting the steel plate only, which represented a common scenario in an underbelly blast event, velocities of ≤6 m/s resulted in HIC values below the FMVSS 201U threshold of 1,000, and a velocity of 7 m/s resulted in HIC values well over the threshold. Roof padding was found to reduce the peak translational head acceleration and the HIC, with rigid IMPAXX foams performing better than semirigid ethylene vinyl acetate (EVA) foam. However, the head injury potential was reduced considerably more by wearing a helmet than by the addition of roof padding.

Conclusions: The results of this study provide initial quantitative findings that provide a better understanding of helmet–roof interactions in vertical impacts and the contributions of the military helmet and roof padding to mitigating head injury potential. Findings from this study will be used to inform further testing with the future aim of developing a new minimum head clearance standard for occupants of light armored vehicles.

KEYWORDS:

• military vehicle
• underbelly blast
• military helmet
• head injury
• vertical impact

Acknowledgments

The authors thank General Motors Holden Australia, in particular, Jacek Wawrzynczak and Andrew Law from the Holden Proving Ground Safety Laboratory in Lang Lang, Victoria, for conducting the testing, Glen Crawford for advice on the test matrix, and Bill Bons for facilitating the study. The authors also thank Dr. Mark Edwards, Land Division, DST Group, for his advice on human factors and soldier anthropometry and Dr. Ping Tan for discussions on the testing.