Comparison of frontal crash compatibility metrics between battery-electric and internal-combustion-engine passenger vehicles

Abstract

Objective

The objective of this study was to determine if there are any emerging issues related to battery-electric vehicles’ (BEVs’) geometry, force distribution, and extra weight that may make them more aggressive partners in front-to-front crashes through comparisons of stiffness metrics derived from crash tests.

Methods

We examined load cell wall data from the National Highway Traffic Safety Administration’s (NHTSA’s) New Car Assessment Program full-width frontal crash test at 56 km/h. Fourteen BEVs, ranging in class from small cars to large SUVs, were compared with 92 internal-combustion-engine (ICE) vehicles, ranging in class from small cars to midsize pickups. We selected vehicles based on the test results available in the NHTSA Vehicle Crash Test Database, and there were no tests of battery-electric (BE) pickups. Data included load-cell-wall force-time histories and longitudinal vehicle acceleration from the body structure. We constructed force-displacement diagrams and calculated static, dynamic, energy-equivalent, and initial front-end-stiffness metrics from load cell wall forces, vehicle acceleration, and static front-end crush measurements for each vehicle. Linear regression models were applied to the metrics for comparison between powertrains.

Results

BE cars and BE SUVs weighed more than their ICE counterparts, on average 369 kg and 286 kg more, respectively. Initial (200 mm and 400 mm), energy-equivalent and dynamic front-end-stiffness metrics, average height of force, and individual maximum forces, when compared with vehicle shadow, were not statistically different between powertrains. Static stiffness (p = 0.04) and initial stiffness (300 mm; p = 0.05) decreased for BEVs with greater shadow and increased with greater shadow for ICE vehicles. When controlling for vehicle shadow, dynamic crush was greater (p = 0.01), the percentage of center force was lower (p < 0.001), and maximum peak force was higher (p = 0.01) for BEVs compared with ICE vehicles. For the Kia Niro BEV and ICE pair, the 329 kg heavier BEV had a 165 mm longer crush distance, which resulted in lower forces and stiffness metrics compared with the traditional ICE counterpart.

Conclusion

Overall, this study indicates that current BEVs are not excessively aggressive in terms of stiffness metrics for frontal crash compatibility compared with ICE vehicles.

Keywords:

• Incompatibility
• crashworthiness
• curb weight
• aggressivity
• BEV

Disclosure statement

No potential conflict of interest was reported by the authors.

Additional information

Funding

This work was supported and funded by the Insurance Institute for Highway Safety.