Preparation and wear resistance of water-based UV curable ink

ABSTRACT

UV water-based inks have disadvantages such as slow curing speed and low degree of crosslinking. In this paper, the copolymer P(MMA-r-HEMA) was prepared by traditional free radical polymerization using methyl methacrylate (MMA) and hydroxyethyl methacrylate (HEMA) as monomers, and the copolymer P(MMA-r-HEMA) was modified by acrylic acid (AA) to synthesis completely water-soluble acrylic prepolymer P(MMA-r-HEMA)-g-AA. Triethylenetetramine reacted with glycidyl methacrylate (GMA) to yield a multifunctional reactive diluent TGMA. Secondly, acrylic prepolymer P(MMA-r-HEMA)-g-AA, multifunctional reactive diluent TGMA and photoinitiator were used to prepare water-based UV curable ink. The influence of the type and quality of photoinitiator, the relative molecular weight and mass fraction of P(MMA-r-HEMA)-g-AA, the number of functional groups and mass fraction of TGMA on the UV ink curing speed and the wear resistance of the ink film were discussed. When the mass fraction of the photoinitiator TPO was 1%, the number-average relative molecular mass of the prepolymer was 1.67 × 10⁴ g/mol and the mass fraction was 60%, the number of functional groups of the reactive diluent was 6 and the mass fraction was 40%, the light curing of UV water-based ink was completed in 0.1 s, and the mass loss after 50 times abrasion was 0.2–0.4%.

KEYWORDS:

• Ultraviolet curing ink
• photoinitiator
• prepolymer
• reactive diluent
• light curing

Disclosure Statement

No potential conflict of interest was reported by the author(s).

Data Availability Statement

All data generated or analyzed during this study are included in this published article.