221
Views
4
CrossRef citations to date
0
Altmetric
Research Article

Gasification of cotton stalk in a downdraft gasifier

Pages 2973-2985 | Received 14 Feb 2019, Accepted 03 Aug 2019, Published online: 13 Aug 2019
 

ABSTRACT

Demand of energy is ever increasing and sustainable form of energy supply is needed. Fossil fuels utilization causes a lot of environmental pollution. Biomass is a renewable, sustainable, and environment friendly form of energy and can be used to fulfill energy needs. Gasification of biomass can be employed to use it efficiently. In the present work, trials were performed on gasification of biomass in a downdraft gasifier. The specific biomass consumption was reasonably constant with a mean value of 0.462 kg/h for all gas flow rates. The temperature of the various zones increased as the producer gas flow rate increased. The temperature of the oxidation zone rose from 580 to 725°C with increase in the gas flow rate from 7 to 19 Nm3/h. The volume percentage of the CO and H2 rose somewhat with rise in gas flow rate. The producer gas calorific value was higher at higher gas flow rates. Tar content of the producer gas was lower than the permissible limits at all gas flow rates except for very low gasification rate. The particulate matter content in the gas was somewhat higher than the permissible limits. The gasifier efficiency ranged between 69.57% and 74.48% as the gas flow rate varied from 7 to 19 Nm3/h.

Additional information

Notes on contributors

R. K. Pal

R. K. Pal is currently working as an Assistant Professor in the Department of Mechanical Engineering at UIET, Panjab University SSG Regional Centre, Hoshiarpur (Punjab), India.    He has completed his Bachelor of Engineering in Mechanical Engineering from Panjab University, Chandigarh, India.     He has completed his Masters in Mechanical Engineering from Punjab Agricultural University, Ludhiana (Punjab),  India.    His research areas of interest are Renewable Energy and Thermal Engineering.   He has published more than 15 research papers in different Journals and Conferences.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.