160
Views
1
CrossRef citations to date
0
Altmetric
Research Article

Thermogravimetric analysis of the torrefied Austrian pine

ORCID Icon &
Pages 3641-3659 | Received 04 Oct 2021, Accepted 11 Apr 2022, Published online: 26 Apr 2022
 

ABSTRACT

This work investigated the impact of thermal pre-treatment on the thermal kinetics of pinecones. An improvised muffle furnace was used for the torrefaction process. The kinetic parameters for thermal decomposition of torrefied pinecones and the raw pinecones were determined from the isoconversional methods (Friedman, Ozawa–Flynn–Wall (OFW) and Kissinger–Akahira–Sunose (KAS)). The reaction mechanism (RM) of the raw and thermally processed pinecones was obtained by the Criado master plots. Thermogravimetric analyses of both the raw and thermally pre-treated pinecones were performed at a heating rate of 5°C·min−1, 10°C·min−1 and 15°C·min−1. Nitrogen gas was used as an inert medium for both thermal pre-treatment and pyrolysis of raw pinecones. The activation energies estimated from OFW and KAS, and Friedman for torrefied pinecones are 165.87 kJ·mol−1, 169.66 kJ·mol−1 and 130.68 kJ·mol−1,respectively. The calculated value of activation energy from OFW and KAS for the torrefied pinecones was estimated to be 8.66–8.93% higher than that of raw pinecones; however, in the case of the differential method, it decreased by a margin of 10%. The reduced reaction rate of the torrefied pinecones was slightly higher than that of the raw pinecones. However, no change in the characteristics of the reduced reaction rate of torrefied pinecones was noticed with respect to its raw form, in relation to thermal conversion. The clean gas generation after processing the raw pinecones was noticed to be 27.54% higher than its raw form. The weight percentages of alkali elements were increased by 24% after the torrefaction process.

Supplementary Material

Supplemental data for this article can be accessed on the publisher’s website.

Acknowledgments

The authors express their sincerest gratitude to the Indian Instrumentation Centre, the Indian Institute of Technology, Roorkee, Uttarakhand, India; the Department of Biotechnology, Budapest University of Technology and Economics, Budapest, Hungary; the National Agriculture Research and Innovative Centre, Szent-Györgyi Albert, Hungary; Professor Suraj B. Singh, Govind Ballabh Pant University of Agriculture and Technology, Pantnagar, Uttarakhand.

Disclosure statement

No potential conflict of interest.

Author Credit section

Alok Dhaundiyal: conceptualisation, investigation, data curation, formal analysis, writing – original draft, Writing- review & editing, software, supervision. Laszlo: project administration, funding.

Additional information

Funding

This work was financed by the Hungarian University of Agriculture and Life sciences (formerly Szent Istvan University) under the framework of the Stipendium Hungaricum Programme.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.