132
Views
1
CrossRef citations to date
0
Altmetric
Research Article

Mathematical modeling and analysis of thermodynamic performance parameters of tubular solar still

ORCID Icon & ORCID Icon
Pages 6129-6152 | Received 22 Feb 2022, Accepted 21 Jun 2022, Published online: 05 Jul 2022
 

ABSTRACT

Mathematical modeling of the tubular solar still (TSS) has been carried out. The MATLAB code has been developed for calculating the performance parameters like tubular glass cover temperature, rectangular basin liner temperature, basin water temperature, and productivity and efficiency. The results obtained from mathematical modeling has been compared with the benchmark results of experimental work of various research work related to present study for the validation of present work . Different heat transfer coefficients have been calculated on hourly basis. Heat transfer coefficient values increase from minimum at early in the morning and reaches the maximum at afternoon then it starts decreasing near the evening time. The maximum evaporative heat transfer coefficient, convective heat transfer coefficient, and radiative heat transfer coefficient are 33.28 Wm2C, 2.90 Wm2C, and 6.49 Wm2C, respectively. Evaporative heat transfer coefficient is dominating amongst others. Basin water temperature and hourly yield of TSS have been calculated for 1 cm, 2 cm, 3 cm, and 4 cm water depth, respectively. The tubular glass cover temperature and basin water temperature for different climatic zone of India have been calculated. Various cities such as Nagpur, Chennai, Jaipur, Srinagar, and Guwahati are considered for studying the effect on tubular glass cover temperature, water temperature stored in rectangular basin liner, hourly yield for these geographical locations of India. The tubular glass cover temperature for three absorptivity values 0.04, 0.08, and 0.16 (of glass materials) has also been calculated. As a result, 5.8 kg of fresh water cumulative yield have been obtained from 6 am to 6 pm for whole day. From the economic analysis study of TSS, it is found that cost for producing fresh water per kg depend on annual interest rate. Higher value of interest rate results in higher cost for producing fresh water. In the study, annual rate considered are 5%, 10%, and 15% for which cost of producing fresh water are 0.255, 0.521, and 0.786 $/kg, respectively. Efficiency of TSS increases from morning and reaches maximum at the noon when solar intensity is highest for a day then it starts decreasing toward the end of day in the evening. The maximum thermal efficiency of TSS is 43.78% at 12 noon where solar intensity is maximum for the day. The maximum exergy efficiency obtained at 11 am is 50.88% then it decreases as the temperature and solar intensity decreases with the time.

Nomenclature

It=

Solar intensity

m=

Mass

A=

Area

Δt=

Time difference between initial and final

Q=

Heat transfer

T=

Temperature

h=

Heat transfer coefficient

p=

Partial saturated vapor pressure

ξeff=

Effective emissivity

σ=

Stephan-Boltzmann constant

v=

Wind velocity

k=

Thermal conductivity

ΔqL=

Enthalpy of vaporization of water

m˙e=

Hourly yield

Me=

Total production of fresh water

kg=

kilograms

η=

Efficiency of TSS

α=

Absorptivity

R=

Reflectivity

a=

Ambient

g=

Tubular glass cover

b=

Rectangular basin

w=

Water

gi=

Inner side of tubular glass cover

go=

Outer side of tubular glass cover

ga=

Tubular glass cover to air

bw=

Rectangular basin to water

wg=

Water to tubular glass cover

c=

Convection

e=

Evaporation

r=

Radiation

$=

United states dollar currency

Acknowledgments

Authors heartily acknowledge National Institute of Technology Raipur (CG), India for providing permission to access library and other resources for writing research manuscript.

Disclosure statement

No potential conflict of interest was reported by the author(s).

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.