252
Views
6
CrossRef citations to date
0
Altmetric
Articles

Effect of spark timing on the performance of a spark ignition engine running on biogas–hydrogen blends

, &
Pages 635-642 | Received 08 Aug 2015, Accepted 09 Oct 2015, Published online: 20 Nov 2015
 

ABSTRACT

The influence of hydrogen addition in small quantities to biogas was studied in a spark ignition (SI) stationary engine at different spark timings at fixed equivalence ratio of 0.92. At this condition the engine operated with good thermal efficiency in the neat biogas mode. A single-cylinder diesel engine modified to operate as a SI engine was employed. The speed was 1500 rpm and the throttle opening was fixed at 100% at a compression ratio of 13:1. The maximum power output and thermal efficiency were achieved at a hydrogen energy share of 10%. Beyond this the engine experienced rough operation due to rapid combustion. However, nitric oxide (NO) emissions were high at this condition. At 5% hydrogen addition the hydrocarbon (HC) emission was significantly reduced with good thermal efficiency. NO levels were also low with 5% hydrogen addition as compared to neat biogas operation as retarded ignition timings could be used. The optimum ignition timings were significantly retarded, as the hydrogen quantity was raised. The best operating condition was 5% hydrogen share with a spark timing of 20°bTDC (before Top Dead Centre). It is concluded that addition of small amounts of hydrogen to biogas can significantly improve biogas engine operation.

Acknowledgements

The authors wish to thank the Ministry of Non-Conventional Energy Sources (MNES) for the financial support extended in doing this project. The hardware support given by M/s. National instruments is gratefully acknowledged.

Disclosure statement

No potential conflict of interest was reported by the authors.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.