192
Views
13
CrossRef citations to date
0
Altmetric
Articles

Investigation of biodiesel production methods by altering free fatty acid content in vegetable oils

, &
Pages 587-595 | Received 13 Jun 2017, Accepted 30 Aug 2017, Published online: 03 Oct 2017
 

ABSTRACT

Biodiesel is derived from vegetable oils and animal fats by various methods among which transesterification is the most widely used. The present work explores the effects of variations in free fatty acids (FFA) of vegetable oils on the biodiesel production methodology as well as on the yield. Three vegetable oils, viz. corn, neem and rubber seed, having FFAs of 0.28, 12.1 and 47.1%, respectively, are mixed in various proportions to get 19 oil samples with FFAs varying from 0.28 to 47.1%. An alkali transesterification method is used for oil samples having FFAs ranging from 0.28 to 5%. The biodiesel yield is around 95% for oils having FFA below 2%; however, it drops below 80% for oils with FFA above 3.6%, while the process fails for oils with FFA above 4.2%. A multi-stage acid–base transesterification process is employed for oils having high FFA, above 6%. A single-stage acid pretreatment process is found to be enough for oils with FFA up to 24%, and a multi-step pretreatment is required thereafter. The measured viscosity, density and calorific value of all the biodiesels are found to be well within the international standard specifications.

Acknowledgements

The authors wish to acknowledge the Department of Science and Technology, Government of India and Indo-German Centre for Sustainability for providing necessary funding through the project grant MEE/13-14/313/IITM/PRAM for carrying out the present work. Access to the facilities at the National Centre for Combustion Research and Development, Indian Institute of Technology Madras, for the fuel property measurements is gratefully acknowledged.

Disclosure statement

No potential conflict of interest was reported by the authors.

Additional information

Funding

This work was supported by the Department of Science and Technology, Government of India [grant number MEE/13-14/313/IITM/PRAM].

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.