Analysis of Mixed Oxide Fuel Critical Experiments with Neutronics ANalysis Codes for Boiling Water Reactors

Abstract

Critical experiments of UO₂ and full mixed oxide (MOX) fuel cores conducted at the Tank-type Critical Assembly (TCA) were aNalyzed using BWR design-purpose codes HINES and CERES with ENDF/B files and Monte Carlo fine analysis codes VMONT and MVP with the JENDL-3.2 library.

The averaged values of the multiplication factors calculated with HINES/CERES, VMONT and MVP agreed with those of experiments within 0.3%ΔAk. The values by the design-purpose codes showed a small difference of 0.1%Δk between UO₂ and MOX cores. Monte Carlo code results showed that the JENDL-3.2 library had a tendency to overestimate the multiplication factors of UO₂ cores by about 0.3%Δk compared with those values of MOX cores. The root mean square errors of calculated power distributions were less than 1% for HINES/CERES and VMONT.

These results showed that (1) the accuracy of these codes when applied to full MOX cores was almost the same as their accuracy for UO₂ cores, which confirmed the accuracy of present core design codes for full MOX cores; and (2) the accuracy of the 190-energy-group Monte Carlo calculation code VMONT was almost the same as that of the continuous-energy Monte Carlo calculation code MVP.

KEYWORDS:

• MOX
• critical experiment
• Monte Carlo method
• multi-energy group
• BWR type reactors
• light water reactors
• multiplication factors
• power distribution
• diffusion calculation
• JENDL-3.2
• accuracy