The design of cyclonic pre-heaters in suspension cement kilns

Abstract

Cement manufacturing consumes two main types of energy: fuel and electricity. On average, energy costs represent 40% of the total production costs per ton of cement. The challenge is to reduce the consumption of energy to about 3000 MJ/ton clinker without the consumption of massive additional amounts of electricity, which is normally associated with additional fuel-saving measures. This can only be achieved by implementing sound thermal energy optimization measures. Energy-efficient suspension cement kilns are now widely applied and use a cascade of cyclonic pre-heaters of moist particulate feedstock, with heat transfer from hot kiln exhaust gas to particles being a function of heat transfer coefficient, temperature difference and gas–solid contact mode and time. The gas–solid contact mode and time depend on particle movement in cyclones, which has previously been studied by positron emission particle tracking. Heat transfer is governed by Nusselt–Reynolds equations, with gas velocity and properties being a function of the temperature profile along the cascade of cyclones. A stepwise approach of the design thus combines changing hydrodynamics and heat transfer along the successive cyclones, with the overall thermal balance of the cascade as control. This approach leads to major design recommendations, as developed in the present paper.

Keywords::

• cyclonic pre-heaters
• heat transfer
• pressure drop
• particle movement
• turbulent contact