94
Views
3
CrossRef citations to date
0
Altmetric
Articles

Effects of temperature on hydrolysis performance and short-chain fatty acids production during thermophilic micro-aerobic fermentation of waste activated sludge

, , , , &
Pages 13183-13189 | Received 15 Oct 2014, Accepted 19 May 2015, Published online: 02 Jul 2015
 

Abstract

Rapid hydrolysis of waste activated sludge (WAS) can be achieved by improving activities of extracellular enzymes under proper temperature conditions. As short-chain fatty acids (SCFAs) accumulation is always consumed by methanogens under anaerobic conditions, and considering that the micro-aerobic condition can inhibit the activities of methanogens, in this study, effects of temperature (55–75°C) on thermophilic micro-aerobic fermentation of WAS were investigated. Results showed that the highest soluble chemical oxygen demand (SCOD) yield was obtained at 60°C (4,407 ± 80 mg/L, 36 h), 2.0 times higher than that obtained at 75°C (2,180 ± 40 mg/L, 36 h), the corresponding hydrolysis rate was 0.6689 d−1. The highest SCFAs yield was 2,928 ± 12 mg COD/L at 60°C and 36 h, 4.9 times higher than that obtained at 75°C (594 ± 10 mg COD/L, 36 h). The analysis of SCFAs composition showed that acetic acid (HAc) accounted for the most percentage (>40%), followed by n-valeric (n-HVa) (20–25%), and propionic acids (HPr) (10–15%). Total suspended solids removal efficiency reached 18.7% after 192-h fermentation at 60°C. These results suggested that the optimal thermophilic micro-aerobic conditions for WAS hydrolysis and SCFAs accumulation from WAS were 60°C and 36-h fermentation time.

Acknowledgments

This research was supported by National Science Foundation for Distinguished Young Scholars (Grant No. 51225802), by Science Fund for Creative Research Groups (Grant No. 51121062), by National Natural Science Foundation of China (Grant No. 51208496), International S&T Cooperation Program (S2015GR1012), by “Hundred Talents Program” of the Chinese Academy of Sciences, and by Chinese Academy of Sciences (135 Project, Grant No. YSW2013B06).

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.